boyambon07: Angenium Project - Transforming Waste into a Jewel

Website - https://angenium.io/

About the project
Angenium is a unique project of the efficiently extract of noble and rare metals, silicon oxides, aluminum and iron from man-caused waste.

We recycle waste, saving the environment from pollution. From the mass of waste, we get a product of high cost. This becomes possible because of the use of a unique sorbent that extracts precious metals with maximum selectivity and is suitable for all types of waste. Today, this technology is absent at the market and has no analogues.

EFFECTIVENESS
The purity of product is 99.9%, the degree of dispersion is from tens of nanometers to microns. The selectivity of the sorbent is 95%, its universality for all precious metals. Resumption and reuse of the main reagents during processing

SCALABILITY
Placement and replication of production in any country and region of the world. Ready solutions with a capacity from 5 000 to 1 000 000 tons per year for the processing of ash and pyrite cinders. Adaptation of technologies for various types of waste (SDW, TKO, etc.). Franchise. Ready-made business “on a ready-to-operate basis”

LIQUIDITY
Consumers of non-ferrous metals, including the state, refining companies, electronics manufacturers, manufacturers of cosmetics, medicines, toothpastes, rubber products, composite materials, paints, paper, building mixtures and much more, including agriculture

ECONOMICAL EFFICIENCY
One of our universal sorbent is 10 times cheaper than each of the imported analogues. Low cost of raw materials: extraction of a certain element from waste is from 5 to 15 times cheaper than at a special deposit

ECOLOGICAL COMPATIBILITY
The release of tens of thousands of hectares of territories irretrievably lost under the waste. Does not pollute the environment (atmosphere, water, soil). The 4th and 5th groups of waste: non-toxic and with no need for additional permits for functional. The sorbent is organic

EXCESS RETURNS
Internal rate of return is from 733%. The cost of raw materials is 10 $ / t., The cost of the products received is from $ 1000 / t. Return of investments in 1 year 8 month after the start of the Pre-ICO. Revenue from 100% per annum for investors from the nominal value of the token

PRODUCIBILITY
100% decomposition of ash dumps into components is the final products. At processing of ash dumps, only 2 reagents are used: ammonium fluoride and ammonia. At processing of pyritic cinders, the technology is used with recycling of the main reagent - ammonium chloride. It is possible to integrate the facility into the existing ecosystem, including the absorption of industrial and domestic waste

• Import substitution of raw materials, materials and equipment • A wide range of final products; Great market growth potential

HOW DOES ANGENIUM WORK?

All existing technologies in the world for the processing of ash and slag wastes and pyrite cinders are tied to mechanical processing. But no one and nowhere in the world extracts the silicon dioxide (SiO2), alumina (AI203) and iron oxide (red pigment Fe203) from ash dumps with a purity of 99.9% and a dispersion of 10 hM, which is possible only by chemical processing. Similarly, incidentally, with the help of a unique organic sorbent, noble and rare metals are extracted, while their extraction with similar foreign sorbents is practically not cost-effective.

ANGENIUM applies a chemical method of processing using the unique highly selective sorbents, which makes production super-profitable.
The content of any element of the periodic Mendeleev's table in the anthropogenic waste (tailings, dumps, waste products) is not lower, and often even higher than in the corresponding natural deposits, developed especially for that sake.
And the extraction of a certain element from the waste is from 5 to 15 times cheaper than at the deposit!

THE ADVANTAGES OF THE SORBENT USED BY ANGENIUM:

IT EXTRACTS WITH A HIGH DEGREE OF SELECTIVITY
(95%) of the solutions is the entire spectrum of noble and rare metals: gold, platinum, silver, palladium, iridium, ruthenium, rhodium, osmium; at using of 1 g of the material it is extracted about 0.7 g Iridium, 1.2 g of Platinum, the remaining NM are from 3 to 5;

UNIVERSAL
Imported sorbents are individual for each NB, i.e. for the extraction of different NM the different sorbents are needed, while our sorbent can extract any NM, replacing several analogues at once.

FROM 10 TIMES CHEAPER THAN FOREIGN ANALOGUES
In addition, imported sorbents extract only 1 g of noble metals, using at the same time 5 g of sorbent.

INVESTMENT ATTRACTIVENESS

Real income in years ahead
Invest and gain from 100% per annum during 2 years or from 67% per annum during 5 years

Solving of Global Problems
Become a part of the revolutionary project, designed for a radical and large-scale change in the approach to waste treatment

Full control and transparency
Control all components of the project due to the blockchain technology

https://youtu.be/w_-FrlBM9R8

TOKEN SALE - (ANG)

ROADMAP

The main advantages of Angenium platform are the following

Convenient decentralized exchange based on blockchain technologies with a guaranteed copy of the data for each user
Functional, maximally simple and profitable transactions
Minimum costs in comparison with other methods of payment for services - minimal or no commission at all within the system
Remittances regulated by smart contracts
Reliable, integrated personal wallet for each user, where the funds are stored and from which payment is made. The peer-to-peer system does not require any document or account for cash transactions.

Cryptocurrency is one of the simplest and most convenient ways to make payments at the moment, as well as a profitable way of investing. Together with the blockchain technology, it has huge capabilities, which Angeniumsystem demonstrates - instant, safe transactions at any time and in any place. An employer is able to quickly find a freelancer within the system, get a high-quality service and pay it with Angenium tokens.

TEAM ICO PROJECT Angenium